                                Firewall Builder

                                  Installation

     ----------------------------------------------------------------------

   Table of Contents

   1. Basic Requirements

   2. Using Binary Packages

                2.1. RedHat 7.x

                2.2. RedHat 8.0

                2.3. RedHat 9.0

                2.4. SuSE 8.2

                2.5. Mandrake 9.0

                2.6. Mandrake 9.1

   3. Building From Source

                3.1. Build Environment and Procedure

                3.2. Special Build Instructions for different OS

                             3.2.1. RedHat 8.0

                             3.2.2. RedHat 9.0

                             3.2.3. SuSE 8.2

                             3.2.4. Mandrake 9.1

                             3.2.5. Solaris 8

                             3.2.6. FreeBSD 4.8

                             3.2.7. OpenBSD 3.3

                             3.2.8. Mac OS X

                3.3. Notes on using gcc 3.2

   List of Tables

   1-1. Prerequisite packages

   2-1. Here is the list of recommended packages and where you can get them
   from:

   2-2. The following packages come with RedHat 8.0

   2-3. Prerequisite Packages

   2-4. Prerequisite Packages

   2-5.

   2-6. Prerequisite Packages

   3-1. Prerequisite Packages

   3-2. Optional Packages

   3-3. Prerequisite Packages

   3-4. Optional Packages

   3-5. Prerequisite Packages

   3-6. Optional Packages

   3-7. Prerequisite Packages

   3-8. Optional Packages

   3-9.

     ----------------------------------------------------------------------

                         Chapter 1. Basic Requirements

   Table 1-1. Prerequisite packages

   +------------------------------+
   | Package    | Version         |
   |------------+-----------------|
   | glib       | 1.2.10.         |
   |------------+-----------------|
   | gtk        | 1.2.10.         |
   |------------+-----------------|
   | gdk-pixbuf | 0.11 or newer   |
   |------------+-----------------|
   | gtkmm      | 1.2.8 or newer  |
   |------------+-----------------|
   | libsigc++  | 1.0 or newer    |
   |------------+-----------------|
   | libxml2    | 2.4.10 or newer |
   |------------+-----------------|
   | libxslt    | 1.0.7 or newer  |
   |------------+-----------------|
   | ucd-snmp   | 4.2.3 or newer  |
   |------------+-----------------|
   | openssl    | 0.9.6b or newer |
   +------------------------------+

     Note: Library glib2 (versions 2.x.x) is not compatible with glib-1.2
     that we use. The same applies to gtk, library gtk-2.0 is incompatible
     with gtk-1.2 that fwbuilder needs. These libraries can be installed on
     the same machine though, they do not conflict.

     Note: Do not use libxml2 v 2.4.25! It has a bug that causes fwbuilder to
     crash every time you save the data file or use Options dialog.

     ----------------------------------------------------------------------

                        Chapter 2. Using Binary Packages

                                2.1. RedHat 7.x

   If your system is configured as "Gnome Workstation" or Ximian Gnome is
   installed, then you already have proper gtk+, gtkmm and libsigc++
   packages. If you are using KDE, then you may need to add these packages.

   We build using gtkmm and libsigc++ packages that come with Ximian Gnome.
   These RPM can be downloaded from their ftp site directly, or obtained as
   part of Ximian Gnome or using Red Carpet. libsigc++ now comes on disk #2
   with RedHat 7.3. Users of RedHat 7.2 systems can also get it from the home
   page at http://libsigc.sourceforge.net/

   libxml2 and libxslt come as part of RedHat 7.3 or can be downloaded from
   http://xmlsoft.org

   Firewall Builder implements number of features which make use of SNMP,
   therefore you will need ucd-snmp RPM installed, too. RPMs we distribute
   are built using ucd-snmp v4.2.3 (as of Feb 2002)

   Table 2-1. Here is the list of recommended packages and where you can get
   them from:

+------------------------------------------------------------------------------+
|glib-1.2.10         |ftp://ftp.ximian.com/pub/ximian-gnome/redhat-73-i386/    |
|--------------------+---------------------------------------------------------|
|gtk+-1.2.10         |ftp://ftp.ximian.com/pub/ximian-gnome/redhat-73-i386/    |
|--------------------+---------------------------------------------------------|
|gtkmm-1.2.8-1       |ftp://ftp.ximian.com/pub/ximian-gnome/redhat-73-i386/    |
|--------------------+---------------------------------------------------------|
|gdk-pixbuf-0.16.0   |Ximian Gnome or RedHat                                   |
|--------------------+---------------------------------------------------------|
|libsigc++-1.0.4-1   |RedHat 7.3 or                                            |
|                    |ftp://ftp.ximian.com/pub/ximian-gnome/redhat-73-i386/    |
|--------------------+---------------------------------------------------------|
|libxml2-2.4.19      |RedHat 7.3 or                                            |
|                    |ftp://ftp.gnome.org/pub/GNOME/stable/redhat/i386/libxml/ |
|--------------------+---------------------------------------------------------|
|libxslt-1.0.15-1    |RedHat 7.3 or                                            |
|                    |ftp://ftp.gnome.org/pub/GNOME/stable/redhat/i386/libxslt/|
|--------------------+---------------------------------------------------------|
|ucd-snmp-4.2.3      |RedHat                                                   |
|--------------------+---------------------------------------------------------|
|ucd-snmp-utils-4.2.3|RedHat                                                   |
|--------------------+---------------------------------------------------------|
|openssl-0.9.6       |RedHat                                                   |
+------------------------------------------------------------------------------+

     ----------------------------------------------------------------------

                                2.2. RedHat 8.0

   Requirements are pretty much the same as for RH 7.x. Here is the list of
   packages that need to be installed:

   Table 2-2. The following packages come with RedHat 8.0

   +---------------------------+
   | glib-1.2.10               |
   |---------------------------|
   | gtk+-1.2.10               |
   |---------------------------|
   | gdk-pixbuf-0.18.0-4       |
   |---------------------------|
   | gdk-pixbuf-gnome-0.18.0-4 |
   |---------------------------|
   | bind-utils-9.2.1-9        |
   |---------------------------|
   | bind-9.2.1-9              |
   |---------------------------|
   | net-snmp-5.0.1-6          |
   |---------------------------|
   | net-snmp-utils-5.0.1-6    |
   |---------------------------|
   | openssl-0.9.6b-29         |
   +---------------------------+

   Unfortunately RedHat 8.0 does not come with libgtkmm and libsigc++ which
   are needed for fwbuilder. There are different ways you can get around this
   problem. You can recompile these two libraries yourself, using source rpm
   packages from earlier RedHat distribution. This can be done, but some
   tweaking of the source code is required. Sooner or later, RedHat and other
   vendors are going to start distributing pre-built binary RPMs of these
   libraries. Mandrake already does that; my experience shows that Mandrake's
   binary RPMs of these libraries work on RedHat 8.0.

   Mandrake packages can be found on on www.rpmfind.net:

     * libgtkmm1.2-1.2.9-3mdk.i586.rpm

     * libsigc++1.0-1.0.4-5mdk.i586.rpm

   Another place where these binary RPM can be found is site
   http://freshrpms.net/ . Look there under Custom packages : RedHat 8.0
   (Psyche), then browse down to gtkmm and libsigc++

     ----------------------------------------------------------------------

                                2.3. RedHat 9.0

   Requirements for RedHat 9.0 are just like those for RedHat 8.0. Here is
   the list of RPMs you need:

   Table 2-3. Prerequisite Packages

   +-----------------------------------------------------+
   | libgtkmm and libsigc++ - the same as for RedHat 8.0 |
   |-----------------------------------------------------|
   | libxml2-2.5.4                                       |
   |-----------------------------------------------------|
   | libxslt-1.0.27                                      |
   |-----------------------------------------------------|
   | openssl-0.9.7a                                      |
   |-----------------------------------------------------|
   | net-snmp-5.0.6 and net-snmp-utils-5.0.6             |
   |-----------------------------------------------------|
   | bind-9.2.1 and bind-utils-9.2.1                     |
   +-----------------------------------------------------+

     ----------------------------------------------------------------------

                                 2.4. SuSE 8.2

   Using our binary RPMs on SuSE 8.2 is easy and requirements are just like
   for RedHat. SuSE 8.2 does not have libgtkmm and libsigc++ libraries; I
   recommend using those from Mandrake or http://freshrpms.net/. Here is the
   list of other packages you would need to install fwbuilder on SuSE 8.2:

   Table 2-4. Prerequisite Packages

   +-----------------------------------------------------+
   | glib-1.2.10                                         |
   |-----------------------------------------------------|
   | gtk-1.2.10                                          |
   |-----------------------------------------------------|
   | libgtkmm and libsigc++ - the same as for RedHat 8.0 |
   |-----------------------------------------------------|
   | gdk-pixbuf-0.18.0                                   |
   |-----------------------------------------------------|
   | libxml2-2.5.3                                       |
   |-----------------------------------------------------|
   | libxslt-1.0.26                                      |
   |-----------------------------------------------------|
   | openssl-0.9.6i                                      |
   |-----------------------------------------------------|
   | ucdsnmp-4.2.6                                       |
   |-----------------------------------------------------|
   | bind9-9.2.2 and bind9-utils-9.2.2                   |
   +-----------------------------------------------------+

     ----------------------------------------------------------------------

                               2.5. Mandrake 9.0

   Here is the list of packages you need to install to run pre-built binary
   packages on this distribution (all these packages come with Mandrake 9.0):

   Table 2-5.

   +------------------------------------------+
   | libgtkmm1.2-1.2.9-3mdk                   |
   |------------------------------------------|
   | libxml2-utils-2.4.23-4mdk                |
   |------------------------------------------|
   | libxml2-2.4.23-4mdk                      |
   |------------------------------------------|
   | libxslt1-1.0.19-4mdk                     |
   |------------------------------------------|
   | libsigc++1.0-1.0.4-5mdk                  |
   |------------------------------------------|
   | ucd-snmp-4.2.3-4mdk                      |
   |------------------------------------------|
   | ucd-snmp-utils-4.2.3-4mdk                |
   |------------------------------------------|
   | libsnmp0-4.2.3-4mdk                      |
   |------------------------------------------|
   | libopenssl0-0.9.6g-1mdk                  |
   |------------------------------------------|
   | openssl-0.9.6g-1mdk                      |
   |------------------------------------------|
   | libgdk-pixbuf-xlib2-0.18.0-3mdk.i586.rpm |
   +------------------------------------------+

   Another option is to download binary packages built by Mandrake. They
   follow our releases and add new packages to Cooker. You can find these
   packages on http://www.rpmfind.net/. Here is the procedure supplied by one
   of our users:

     * go to www.rpmfind.net and click on "Go directly to RPM database"

     * type 'fwbuilder' in search box and download newest one listed from
       Distribution "Mandrake" or "Mandrake Cooker"

     * type 'libfwbuilder4' and download the newest one from mandrake or
       mandrake cooker

     * type 'libfwbuilder4-devel' and download the one that matches the one
       d/l in part 3.

     * as root:

 "rpm -Uvh libfwbuilder4*.rpm fwbuilder*.rpm"

     ----------------------------------------------------------------------

                               2.6. Mandrake 9.1

   Here is the list of RPMs you need to have on your system:

   Table 2-6. Prerequisite Packages

   +----------------------------------------+
   | libglib1.2-1.2.10                      |
   |----------------------------------------|
   | libgtk+1.2-1.2.10                      |
   |----------------------------------------|
   | libgtkmm1.2-1.2.10                     |
   |----------------------------------------|
   | libsigc++1.0-1.0.4                     |
   |----------------------------------------|
   | gdk-pixbuf:                            |
   |                                        |
   | gdk-pixbuf-loaders-0.22.0-1mdk         |
   | libgdk-pixbuf2-0.22.0-1mdk             |
   | libgdk-pixbuf-xlib2-0.22.0-1mdk        |
   | libgdk_pixbuf2.0_0-2.2.1-2mdk          |
   |----------------------------------------|
   | libxml2-2.5.4 and libxml2-utils-2.5.4  |
   |----------------------------------------|
   | libxslt1-1.0.27                        |
   |----------------------------------------|
   | openssl-0.9.7a, libopenssl0.9.7-0.9.7a |
   |----------------------------------------|
   | libnet-snmp50-5.0.7-2mdk               |
   | net-snmp-5.0.7-2mdk                    |
   | net-snmp-mibs-5.0.7-2mdk               |
   | net-snmp-utils-5.0.7-2mdk              |
   |----------------------------------------|
   | bind-utils-9.2.2-1mdk                  |
   +----------------------------------------+

     ----------------------------------------------------------------------

                        Chapter 3. Building From Source

                      3.1. Build Environment and Procedure

   First of all, you need to establish build environment. You will need to
   install the same libraries you would need to run our binary distribution,
   plus development packages of all the same libraries. That is, if you use
   RedHat or Mandrake, then you would need to install gtkmm-devel in addition
   to gtkmm RPM, libxml2-devel in addition to libxml2 and so on. See below
   for the list of packages for other OS and distributions.

   We tested with different versions of libxml2 and libxstl starting from
   libxml2-2.4.0 and libxslt-1.0.0, although we recommend using the latest
   which at the moment of writing this document are libxml2 2.4.19 and
   libxslt 1.0.15. Gnome ships with libxml-1.8 but you do not need to remove
   this one, just install libxml2 in addition, they do not conflict.

   You will also need relatively new resolver library (libresolv). I do not
   know how to determine version of libresolv itself since RedHat now ships
   it as part of glibc and glibc-devel package. You should be fine if you use
   any fresh distribution. If your glibc is 2.2 then your copy of libresolv
   is fine. RedHat 6.2 ships old resolver though, so unfortunately you can
   not build Firewall Builder with support for advanced DNS features on
   RedHat 6.2.

   Make sure you have both bind and bind-devel packages installed and it
   should be bind 8 or 9

   If you want to be able to use SNMP to collect some information about
   hosts/firewalls, you need to have ucd-snmp package installed. We tested
   with version 4.1.3 and newer. Home page: http://net-snmp.sourceforge.net/.
   If snmp library is not installed on your system, then support for features
   requiring SNMP will be automatically disabled by configure script.

   If you would like to build online class reference for the API, then you
   need to install DOC++ package. Home page: http://docpp.sourceforge.net/.
   If it is not present no error message will be shown, but class reference
   won't be generated.

   Firewall Builder has been translated into several languages and uses GNU
   gettext to support internationalization. This means you will need this
   package on your system to build Firewall Builder. Some OS and
   distributions come with it by default, while others do not. See below for
   details.

   To build from source, download and unpack two tar.gz archives:
   libfwbuilder-N.N.N.tar.gz and fwbuilder-M.M.M.tar.gz. First you need to
   build and install libfwbuilder because fwbuilder depends on it. The build
   procedure is the same for both modules, so I'll describe it only once
   using libfwbuilder as an example.

   In order to build, you basically need to do the following:

 $ zcat libfwbuilder-0.10.8.tar.gz | tar xvf -
 $ cd libfwbuilder
 $ ./autogen.sh --prefix=/usr/local
 $ make
 $ su
 # make install

   Note that you should run script autogen.sh instead of configure, this
   script regenrates configure and number of other autoconf scripts using
   templates specific your OS and distribution.

   This installs the following files on your system (actual directory paths
   may differ on different OS and distributions and also depend on the value
   of parameter --prefix given to autogen.sh ):

     * libraries libfwbd, libfwbuilder, libfwcompiler in ${prefix}/lib

     * few documentation files in /usr/share/doc/libfwbuilder-${VERSION}

     * XML DTD file fwbuilder.dtd /usr/share/libfwbuilder/

     * autoupgrade scripts in /usr/share/libfwbuilder/migration

   Once you installed libfwbuilder, you can execute the same sequence of
   commands for fwbuilder. Module fwbuilder builds and installs the
   following:

     * GUI - executable file "fwbuilder", installed in ${prefix}/bin

     * few documentation files in /usr/share/doc/fwbuilder-${VERSION}

     * examples in /usr/share/doc/fwbuilder-${VERSION}/examples

     * various auxiliary files and scripts in /usr/share/fwbuilder

     * locale files in /usr/share/locale/

     * man pages in /usr/share/man/

     * icons in /usr/share/pixmaps/fwbuilder/

     * Policy compiler for iptables - file "fwb_ipt", installed in
       ${prefix}/bin

     * Policy compiler for pf - file "fwb_pf", installed in ${prefix}/bin

     * Policy compiler for ipfilter - file "fwb_ipf", installed in
       ${prefix}/bin

   Table 3-1. Prerequisite Packages

   +------------------------------------------+
   | gtkmm-1.2.8-1 or newer                   |
   |------------------------------------------|
   | gtkmm-devel-1.2.8-1 or newer             |
   |------------------------------------------|
   | gdk-pixbuf-devel-0.16.0 or newer         |
   |------------------------------------------|
   | libsigc++-1.0.4-1 or newer               |
   |------------------------------------------|
   | libsigc++-devel-1.0.4-1 or newer         |
   |------------------------------------------|
   | libxml2-2.4.19 or newer (but not 2.4.25) |
   |------------------------------------------|
   | libxml2-devel-2.4.19 or newer            |
   |------------------------------------------|
   | libxslt-1.0.15-1 or newer                |
   |------------------------------------------|
   | libxslt-devel-1.0.15-1 or newer          |
   |------------------------------------------|
   | openssl-0.9.6b or newer                  |
   |------------------------------------------|
   | openssl-devel-0.9.6b or newer            |
   |------------------------------------------|
   | gettext-0.11.1 or newer                  |
   +------------------------------------------+

   Table 3-2. Optional Packages

   +-------------------------------+
   | bind-devel-9.2.1 or newer     |
   |-------------------------------|
   | bind-utils-9.2.1 or newer     |
   |-------------------------------|
   | doc++-3.4.8-1 or newer        |
   |-------------------------------|
   | ucd-snmp-4.2.3 or newer       |
   |-------------------------------|
   | ucd-snmp-devel-4.2.3 or newer |
   |-------------------------------|
   | ucd-snmp-utils-4.2.3 or newer |
   +-------------------------------+

     ----------------------------------------------------------------------

                3.2. Special Build Instructions for different OS

3.2.1. RedHat 8.0

   As mentioned before, RedHat 8.0 misses gtkmm and libsigc++ libraries. See
   Section 2.2 for istructions where to get these packages from, but this
   time download and install -devel packages as well.

   RedHat 8.0 comes with package net-snmp instead of ucd-snmp. In order to
   obtain support for SNMP queries and DNS zone transfers in Firewall
   Builder, the following packages need to be installed on RedHat 8.0:

   +----------------------------------------------------------------+
   | net-snmp-5.0.6 , net-snmp-devel-5.0.6 and net-snmp-utils-5.0.6 |
   |----------------------------------------------------------------|
   | bind-9.2.1, bind-devel-9.2.1 and bind-utils-9.2.1              |
   +----------------------------------------------------------------+

     Tip: Note that RH 8.0 uses newer version of gcc than RH 7. This means
     that libraries gtkmm and libsigc++ built for RH 7 won't work on RH 8 and
     vice versa. If you upgrade from RedHat 7.3 to 8.0, you may have older
     version of gtkmm left on your system and then wonder why fwbuilder
     compiled on the upgraded system fails. Pease consult Firewall Builder
     FAQ if the program you have compiled yourself fails to start. One of the
     reasons we see often is version mismatch of gtkmm and libsigc++
     libraries.

     ----------------------------------------------------------------------

3.2.2. RedHat 9.0

   Building prerequisites for RedHat 9.0 are just like those for RedHat 8.0.
   Here is the list of RPMs you need:

   Table 3-3. Prerequisite Packages

   +-----------------------------------------------------+
   | libgtkmm and libsigc++ - the same as for RedHat 8.0 |
   |-----------------------------------------------------|
   | libxml2-2.5.4 and libxml2-devel-2.5.4               |
   |-----------------------------------------------------|
   | libxslt-1.0.27 and libxslt-devel-1.0.27             |
   |-----------------------------------------------------|
   | openssl-0.9.7a and openssl-devel-0.9.7a             |
   +-----------------------------------------------------+

   Table 3-4. Optional Packages

   +---------------------------------------------------------------+
   | net-snmp-5.0.6, net-snmp-devel-5.0.6 and net-snmp-utils-5.0.6 |
   |---------------------------------------------------------------|
   | bind-9.2.1, bind-devel-9.2.1 and bind-utils-9.2.1             |
   +---------------------------------------------------------------+

     ----------------------------------------------------------------------

3.2.3. SuSE 8.2

   Building on SuSE 8.2 is easy and requirements are just like for RedHat.
   SuSE 8.2 does not have libgtkmm and libsigc++ libraries; I recommend using
   those from Mandrake or http://freshrpms.net/. Here is the list of other
   packages you would need to compile from source on SuSE 8.2:

   Table 3-5. Prerequisite Packages

   +-----------------------------------------------------+
   | glib-1.2.10 and glib-devel-1.2.10                   |
   |-----------------------------------------------------|
   | gtk-1.2.10 and gtk-devel-1.2.10                     |
   |-----------------------------------------------------|
   | libgtkmm and libsigc++ - the same as for RedHat 8.0 |
   |-----------------------------------------------------|
   | gdk-pixbuf-0.18.0 and gdk-pixbuf-devel-0.18.0       |
   |-----------------------------------------------------|
   | libxml2-2.5.3 and libxml2-devel-2.5.3               |
   |-----------------------------------------------------|
   | libxslt-1.0.26 and libxslt-devel-1.0.26             |
   |-----------------------------------------------------|
   | openssl-0.9.6i and openssl-devel-0.9.6i             |
   +-----------------------------------------------------+

   Table 3-6. Optional Packages

   +------------------------------------------------------+
   | ucdsnmp-4.2.6 (there is no -devel RPM)               |
   |------------------------------------------------------|
   | bind9-9.2.2, bind9-devel-9.2.2 and bind9-utils-9.2.2 |
   +------------------------------------------------------+

     ----------------------------------------------------------------------

3.2.4. Mandrake 9.1

   There are no special instructions for building on Mandrake 9.1. Here is
   the list of RPMs you need to have on your system:

   Table 3-7. Prerequisite Packages

   +------------------------------------------------------------------------+
   | libglib1.2-1.2.10, libglib1.2-devel-1.2.10                             |
   |------------------------------------------------------------------------|
   | libgtk+1.2-1.2.10, libgtk+1.2-devel-1.2.10                             |
   |------------------------------------------------------------------------|
   | libgtkmm1.2-1.2.10, libgtkmm1.2-devel-1.2.10                           |
   |------------------------------------------------------------------------|
   | libsigc++1.0-1.0.4 and libsigc++1.0-devel-1.0.4                        |
   |------------------------------------------------------------------------|
   | gdk-pixbuf:                                                            |
   |                                                                        |
   | gdk-pixbuf-loaders-0.22.0-1mdk                                         |
   | libgdk-pixbuf2-0.22.0-1mdk                                             |
   | libgdk-pixbuf-xlib2-0.22.0-1mdk                                        |
   | libgdk-pixbuf2-devel-0.22.0-1mdk                                       |
   | libgdk_pixbuf2.0_0-2.2.1-2mdk                                          |
   |------------------------------------------------------------------------|
   | libxml2-2.5.4, libxml2-devel-2.5.4 and libxml2-utils-2.5.4             |
   |------------------------------------------------------------------------|
   | libxslt1-1.0.27 and libxslt1-devel-1.0.27                              |
   |------------------------------------------------------------------------|
   | openssl-0.9.7a, libopenssl0.9.7-0.9.7a and                             |
   | libopenssl0.9.7-devel-0.9.7a                                           |
   +------------------------------------------------------------------------+

   Table 3-8. Optional Packages

   +--------------------------------+
   | libnet-snmp50-5.0.7-2mdk       |
   | net-snmp-5.0.7-2mdk            |
   | net-snmp-mibs-5.0.7-2mdk       |
   | net-snmp-trapd-5.0.7-2mdk      |
   | libnet-snmp50-devel-5.0.7-2mdk |
   | net-snmp-utils-5.0.7-2mdk      |
   |--------------------------------|
   | bind-devel-9.2.2-1mdk          |
   | bind-utils-9.2.2-1mdk          |
   +--------------------------------+

     ----------------------------------------------------------------------

3.2.5. Solaris 8

   You need to install GNU development environment, in particular gcc version
   2.95.3 or newer, GNU ld which is part of binutils-2.11.2 , GNU make,
   autoconf, automake, libtool and GNU gettext. These packages can be
   downloaded from http://www.sunfreeware.com

   Here is the list of recommended packages. Precompiled xml2 and xslt
   libraries for Solaris 8 can be downloaded from this site:
   http://garypennington.net/libxml2/ The rest can be found either on
   http://www.unixrealm.com/downloads/ or on http://www.sunfreeware.com

   Table 3-9.

   +------------------------------------------------------------------------+
   | autoconf-2.53     |                                                    |
   |-------------------+----------------------------------------------------|
   | automake-1.6      |                                                    |
   |-------------------+----------------------------------------------------|
   | libtool-1.4       |                                                    |
   |-------------------+----------------------------------------------------|
   | gettext-0.10.37   | GNU gettext                                        |
   |-------------------+----------------------------------------------------|
   |                   |                                                    |
   |-------------------+----------------------------------------------------|
   | gcc-2.95.3        |                                                    |
   |-------------------+----------------------------------------------------|
   | binutils-2.11.2   | Need this for GNU ld                               |
   |-------------------+----------------------------------------------------|
   | make-3.79.1       | GNU make                                           |
   |-------------------+----------------------------------------------------|
   |                   |                                                    |
   |-------------------+----------------------------------------------------|
   | glib-1.2.10       |                                                    |
   |-------------------+----------------------------------------------------|
   | gtk+-1.2.10       |                                                    |
   |-------------------+----------------------------------------------------|
   | gtkmm-1.2.8       |                                                    |
   |-------------------+----------------------------------------------------|
   | gdk-pixbuf-0.13.0 | See comment for libpng below                       |
   |-------------------+----------------------------------------------------|
   | libpng-1.0.6      | Do not use any other version; pre-built gdk-pixbuf |
   |                   | v0.13 found on SunFreeware.com requires            |
   |                   | specifically libpng 1.0.6                          |
   |-------------------+----------------------------------------------------|
   | libsigc++-1.0.4   |                                                    |
   |-------------------+----------------------------------------------------|
   | libxml2-2.4.16    |                                                    |
   |-------------------+----------------------------------------------------|
   | libxslt-1.0.12    |                                                    |
   |-------------------+----------------------------------------------------|
   | openssl-0.9.6c    | Try openssl_noshared-0.9.6c package if configure   |
   |                   | does not find openssl even though it is installed  |
   |-------------------+----------------------------------------------------|
   | ucdsnmp-4.2.3     |                                                    |
   |-------------------+----------------------------------------------------|
   | doc++-3.4.2       |                                                    |
   +------------------------------------------------------------------------+

   Certain patches are also critical. Make sure you have at least patch
   109326 which replaces some header files and libraries we use. It is a good
   idea to install all latest recommended patches anyway.

   Since all the packages downloaded from SunFreeware or Unixworld install in
   /usr/local, you need to set environment variables PATH to begin with
   "/usr/local/bin" and LD_LIBRARY_PATH to include /usr/local/lib before you
   run script configure.

     ----------------------------------------------------------------------

3.2.6. FreeBSD 4.8

   Here is the list of packages and ports that need to be installed before
   you can compile libfwbuilder and fwbuilder:

     * devel/autoconf (port)

     * devel/automake (port)

     * devel/libtool (package)

     * devel/m4-1.4_1 (package)

     * devel/gettext (package)

     * devel/gmake (package)

     * devel/glib12 (package)

     * devel/libsigc++ (port)

     * x11-toolkits/gtk12 (package)

     * x11-toolkits/gtk-- (port)

     * graphics/gdk-pixbuf (package)

     * security/openssl (port)

     * net/net-snmp (port)

     * net/bind9 (port)

     * textproc/libxml2 (package)

     * textproc/libxslt (package)

   Make sure you use gmake to build and set the following environment
   variables:

 export GLIB_CONFIG=/usr/local/bin/glib12-config
 export LD_LIBRARY_PATH=/usr/local/lib

   Firewall Builder is available as a port for FreeBSD. However, until it is
   a part of the standard ports tree, the port needs to be installed
   manually. As of the time of this writing, existing port "fwbuilder" is
   obsolete (v0.8.7, about two years old) and port "libfwbuilder" is not
   being maintained.

     * Install prerequisite packages and ports;

     * Download port files libfwbuilder-freebsd-port.tar and
       fwbuilder-freebsd-port.tar and unpack them in directories
       /usr/ports/security/libfwbuilder and /usr/ports/security/fwbuilder.

     * Enter directory /usr/ports/security/fwbuilder and type "make install".
       This should install API library libfwbuilder, the GUI and all policy
       compilers.

     ----------------------------------------------------------------------

3.2.7. OpenBSD 3.3

   You need the same ports as for FreeBSD and should use gmake to build.

     * devel/autoconf

     * devel/automake

     * devel/libtool

     * x11/gtkmm . It installs some other packages as dependencies.

     * graphics/gdk-pixbuf (port). If your system does not have Gnome and you
       do not want it, install this port using the following command:

 FLAVOR=no_gnome make install

     * net/ucd-snmp

     * net/bind9

     * textproc/libxml

     * textproc/libxslt

   Firewall Builder is available as a port for OpenBSD. However, until it is
   a part of the standard ports tree, the port needs to be installed
   manually.

     * Install gdk-pixbuf port (with or without GNOME). The rest of the
       prerequisite ports will be installed automatically as needed.

     * Download port files libfwbuilder-openbsd-port.tar and
       fwbuilder-openbsd-port.tar and unpack them in directories
       /usr/ports/security/libfwbuilder and /usr/ports/security/fwbuilder.

     * Enter directory /usr/ports/security/fwbuilder and type "make install".
       This should install API library libfwbuilder, the GUI and all policy
       compilers.

     ----------------------------------------------------------------------

3.2.8. Mac OS X

   Firewall Builder compiles and works on Mac OS X, provided the following
   fink packages are installed:

     * autoconf25

     * automake

     * openssl097 and openssl097-dev

   The list of packages that are needed is actually a lot longer, but almost
   all of them will be installed automatically as dependencies. These few
   packages, however, need to be installed beforehand.

   We provide fink ".info" files for Mac OS X. You need to download source
   code archives and these two .info files from our web site, then install
   them as local fink packages:

     * 

       Skip this phase if this is the first time you install Firewall Builder
       as a fink package on your Mac.

       Remove any installed libfwbuilder and fwbuilder packages that you may
       have:

 $ fink list '*fwb*'
 $ fink remove fwbuilder libfwbuilder
              

       Remove source code packages and binary packages that may have been
       left over from the previous installlation:

 $ rm /sw/src/libfwbuilder*
 $ rm /sw/src/fwbuilder*
 $ rm /sw/fink/dists/local/main/binary-darwin-powerpc/libfwbuilder*
 $ rm /sw/fink/dists/local/main/binary-darwin-powerpc/fwbuilder*
              

     * Download source code; you will need archives libfwbuilder-1.0.0.tar.gz
       and fwbuilder-1.0.10.tar.gz. Copy both files to the directory /sw/src

     * Download fink .info files from our web site and copy them over to the
       /sw/fink/dists/local/main/finkinfo/ directory

     * Install packages:

 $ fink install fwbuilder
              

     * Fink should check dependencies and, if some packages are missing on
       your system, bring and install them. It installs libfwbuilder as part
       of this process.

     ----------------------------------------------------------------------

                          3.3. Notes on using gcc 3.2

   As of October 2002 (version 1.0.7) both libfwbuilder and fwbuilder compile
   and run just fine on systems based on gcc 3.2 (RedHat 8.0 and Mandrake
   9.0). Please note that the whole system, including all the libraries, must
   be compiled with the same compiler. This happens because gcc 3.x uses
   different name mangling algorithm for C++ code than previous versions of
   gcc; therefore it produces code that is incompatible with code compiled
   with previous versions of the compiler. For example, RedHat 8.0 does not
   ship libraries libsigc++ and libgtkmm which we use for the GUI. You either
   need to compile these libraries yourself, or use pre-built packages from
   Mandrake 9.0. Binary packages of these libraries built for RedHat 7.3
   won't work!
