Title   : README 
Hardware: ASE Serial Smartcard Reader
Author  : David Corcoran
Required: gcc 2.7 or higher, termios libraries.

To install this package from a Linux prompt edit the Makefile and 
determine if the compiler and linker flags are appropriate for your
system.  When finished simply type make.

This will create two shared libraries called:

  libase_drive_single.so
  libase_drive_dual.so

Use the correct library depending on whether you have a single or dual slot reader.
This is the library used to interact with the pcsc-lite daemon pcscd.  To install
this reader into the pcsc-lite architecture simply edit the etc/reader.conf
file included in the package and set the LIBRARY_PATH to the location
of the shared library.  An example reader.conf is provided in this package
in the etc directory.  Also, set the CHANNELID to the approprate serial
port desired.  Use the following values for CHANNELID:

COM1	0x0103F8
COM2	0x0102F8
COM3	0x0103E8
COM4	0x0102E8

DEVICENAME and FRIENDLYNAME should already be set and should not be modified.

David Corcoran
