                        Function coverage
                        =================
The following table lists SAS Management Protocol (SMP) functions
in alphabetical order in the left column. The second column is the
standard or draft that the function first appeared in or was extended.
The final column is the utility in the smp_utils package that invokes
that function on a given SMP target. Notice that many of the newly
introduced functions have no corresponding utility.

SMP Function                          Standard         smp_utils utility
------------------------------------  ---------------  ---------------------
CONFIGURE GENERAL                     2                smp_conf_general
CONFIGURE PHY EVENT                   2    
CONFIGURE ROUTE INFORMATION           1, 2             smp_conf_route_info
CONFIGURE ZONE MANAGER PASSWORD       2    
CONFIGURE ZONE PERMISSION TABLE       2    
CONFIGURE ZONE PHY INFORMATION        2    
DISCOVER                              1, 1.1, 2        smp_discover
DISCOVER LIST                         2                smp_discover_list
ENABLE DISABLE ZONING                 2    
PHY CONTROL                           1, 2             smp_phy_control
PHY TEST FUNCTION                     1.1, 2           smp_phy_test
READ GPIO REGISTER                    SFF-8485         smp_read_gpio
REPORT BROADCAST                      2    
REPORT EXPANDER ROUTE TABLE LIST      2                smp_rep_exp_route_tbl
REPORT GENERAL                        1, 1.1, 2        smp_rep_general
REPORT MANUFACTURER INFORMATION       1, 1.1, 2        smp_rep_manufacturer
/* REPORT PHY BROADCAST COUNTS           2             removed in sas2r13 */
REPORT PHY ERROR LOG                  1, 2             smp_rep_phy_err_log
REPORT PHY EVENT                      2    
REPORT PHY EVENT LIST                 2    
REPORT PHY SATA                       1, 2             smp_rep_phy_sata
REPORT ROUTE INFORMATION              1, 2             smp_rep_route_info
REPORT SELF-CONFIGURATION STATUS      2    
REPORT ZONE MANAGER PASSWORD          2    
REPORT ZONE PERMISSION TABLE          2    
WRITE GPIO REGISTER                   SFF-8485         smp_write_gpio
ZONE ACTIVATE                         2    
ZONE LOCK                             2    
ZONE UNLOCK                           2    
ZONED BROADCAST                       2    

There are 27 SMP functions defined in sas2r13.pdf (plus 2 in SFF-8485)
of which smp_utils currently implements 14.

The sas-r05.pdf draft is taken to represent the original SAS standard
(ANSI INCITS 376-2003). The sas1r10.pdf draft is taken to represent the
SAS-1.1 standard (ANSI INCITS 417-2006). The most recent draft of SAS-2
is sas2r13.pdf .

At this time all SMP functions introduced in the original standard
and SAS-1.1 have corresponding smp_utils utilities. Currently
smp_discover_list and smp_rep_exp_route_tbl are the only utilities
corresponding to a newly introduced function in SAS-2.


Doug Gilbert
6th January 2008
