.SS address
.SS r_address
.I read-only, ascii
.br
The entire 64-bit unique ID. Given as upper case hexidecimal digits (0-9A-F).
.br
.I address
starts with the
.I family
code
.br
.I r address
is the
.I address
in reverse order, which is often used in other applications and labeling.
.SS crc8
.I read-only, ascii
.br
The 8-bit error correction portion. Uses cyclic redundancy check. Computed from the preceeding 56 bits of the unique ID number. Given as upper case hexidecimal digits (0-9A-F).
.SS family
.I read-only, ascii
.br
The 8-bit family code. Unique to each
.I type
of device. Given as upper case hexidecimal digits (0-9A-F).
.SS id
.SS r_id
.I read-only, ascii
.br
The 48-bit middle portion of the unique ID number. Does not include the family code or CRC. Given as upper case hexidecimal digits (0-9A-F).
.br
.I r id
is the
.I id
in reverse order, which is often used in other applications and labeling.
.SS locator
.SS r_locator
.I read-only, ascii
.br
Uses an extension of the 1-wire design from iButtonLink company that associated 1-wire physical connections with a unique 1-wire code. If the connection is behind a
.B Link Locator
the
.I locator will show a unique 8-byte number (16 character hexidecimal) starting with family code FE.
.br
If no
.B Link Locator
is between the device and the master, the
.I locator
field will be all FF.
.br
.I r locator
is the
.I locator
in reverse order.
.SS present
.I read-only, yes-no
.br
Is the device currently
.I present
on the 1-wire bus?
.br
Note, this means that each hex byte (2 characters) is reversed, not the text string.
.SS type
.I read-only, ascii
.br
Part name assigned by Dallas Semi. E.g.
.I DS2401
Alternative packaging (iButton vs chip) will not be distiguished.
