			Ethernet Frame Diverter: divert-utils-0.221
			

1. Compilation
   Make sure there is a include/asm link to your architecture (like asm-i386)

   issue a 'make' and you should be ok :)
   
2. Usage
   The detailed syntax is as follow:
   one command can only act on ONE ethernet adapter at once
   
   Get the diverter status on eth0:
		divert on eth0
	
	Reset the diverter on eth0:
		divert on eth0 reset
	
	Enable the diverter on eth0:
		divert on eth0 enable

	Disable the diverter on eth0:
		divert on eth0 disable

	Divert all ip frames on eth0:
		divert on eth0 ip add

	Divert all tcp frames on eth0:
		divert on eth0 tcp add

	Divert all www and smtp traffic arriving on eth0:
		divert on eth0 tcp add dst 80 25

	You can combine several actions in one single line:
		divert on eth0 enable tcp add dst 80 25 icmp add udp add src 139

		this last command would:
		- enable the diverter on eth0
		- divert all www & smtp traffic
		- divert all netbios source frames
		- divert all icmp frames


3. References

   email: Benoit.Locher at skf dot com
   www:   http://www.freshmeat.net/projects/etherdivert

4. Changelog

  06/09/2000    0.1    Initial version 
  12/09/2000    0.2    tcp/udp ports numbers are now stored in network order for performance,
                       so displaying of port is now correct from divert 0.42
                0.21   Added Frame Diverter version checking
  14/09/2000    0.22   Changed the arguments of ioctl() according to changes in kernel code
